Egg Crate

INSERT MODEL

For applications in floors of any thickness, walls or ceilings, when maximum air flow is desired. The Insert Model has a self-rimming, eased lip 1/4" thick and 3/4" wide. Fluted dowels secure each web to the 1-1/4" wide side rails and end pieces. Specify the exact opening size when ordering.

Flush Mount

Original Flush Model

Our "original" design is crafted to satisfy the demands of professional floor layers. Each vent is oversized to cover a standard adjustable metal register installed on the subfloor. The ability to control air flow is retained. The patented design allows flush installation in a 3/4' floor. Fluted dowel construction.

Trimline Flush Model

Slim, trim, flush styling with the cleanest look possible. Seats flats on the subfloor. The lift-out vent permits cleaning of the duct throat. Delicate looking, but tough, Adjustable damper also available.

Solid Block Flush Model

The flush styling is the perfect complement for hardwood floors, installed on the subfloor, it provides a clean, continuous look. Individually sized to fit within its' own frame.
Available in Red Oak, White Oak, and Maple Only

Insert Styles

Original Insert Model

Designed for use in any thickness flooring of any material. Same size as the metal register it replaces and overlaps the opening with a 1/4" thick, 3/4" wide self-rimming lip. Replaces any metal register.

Trimline Insert Model

Insert vents REPLACE the metal register. Cleanly designed with a solid, self-rimming lip to conceal inexact cuts in your surface material. Adjustable damper also available.

Solid Block Insert Model

Put the finishing touch on any floor - hardwood, stone, tile, vinyl or carpet. Replaces the metal register. Drop the vent into the duct opening. The gently rounded rims conceal the edge of your flooring. Adjustable damper also available.

Available in Red Oak, White Oak, and Maple Only.

Egg-Crate Style

For applications in floors of any thickness, walls or ceilings, when maximum air flow is desired. The Insert Model has a self-rimming, eased lip 1/4" thick and 3/4" wide. Fluted dowels secure each web to the 1-1/4" wide side rails and end pieces. Specify the exact opening size when ordering.

More Vent Models

TOE KICK KIT

Our Toe Kick Kit is designed to conceal a standard adjustable metal register installed in the toe space of a cabinet or vanity. Each kit includes one vent, two predrilled mounting blocks with attachment screws, and two pairs of adhesive-backed magnetic mountings. The 1/2" thick mounting blocks are installed prior to fitting the base shoe. The vent is easily removable for access to the metal register. If necessary, the grill height may be reduced by trimming up to 3/8" off each of the top and bottom rails. Available in Original or Trimline styles.

ADJUSTABLE DAMPER

The adjustable damper is available on the standard sizes. The damper can be used on the Trimline Insert and Flush with Frame models as well as the Solid Block Insert and Flush with Frame models.

ONE DIRECTIONAL VENTS

One of the most popular ordered vents. Most commonly used in wall mount applications for supply air or return air use. Flush or Insert models; Original or Trimline styles.

BASE VENT

Designed to cover duct openings near the base board. Replaces the metal register. The angled face of the base vent covers the entire opening leaving only the detailed craftsmanship to be admired. Use the overall dimensions to determine the size you need to cover opening.